Why output matters
A radiator's heat output, shown in BTU or watts, tells you how much heat it can deliver. Choosing one that is too small leaves a room chilly however long the heating runs. Designer radiators vary widely in output for their size, so two radiators that look similar on the wall can heat very differently. Always compare outputs rather than dimensions alone.
Working out what a room needs
The heat a room needs depends on its size, ceiling height, insulation, window area, outside walls and how the room is used. Living rooms and bathrooms are often kept warmer than bedrooms. A BTU calculator takes these into account and gives a target figure. Aim for a radiator, or a combination of radiators, that meets or slightly exceeds it.
Understanding Delta T
Radiator outputs are usually quoted at a standard temperature difference between the water and the room, often Delta T 50. Modern condensing boilers and heat pumps may run at lower water temperatures, which means a radiator delivers less heat than its headline figure. If you have a heat pump or run your boiler cooler, choose radiators with more output to compensate.
Vertical or horizontal
Vertical radiators suit narrow walls and spaces beside doors, freeing up the area under windows. Horizontal radiators sit traditionally under windows, where they help counter cold draughts. Column radiators come in both orientations and often deliver strong output for their size. Flat panel designs give a clean, minimal look. Pick the shape that fits the wall, then check the output.
Valves and finishing touches
Every plumbed radiator needs a pair of valves, so choose a style and finish that matches. Thermostatic valves let you set each room's temperature, and smart radiator valves add scheduling from your phone. Check the pipe centres and whether your pipework comes from the floor or the wall before ordering, and have radiators fitted by a qualified installer.






